Brand: NTI, Model: Enviromux-5D

Made in USA

PRICE: CALL @ 01720-566000

5 external configurable sensors, 5 digital inputs, 2 output relays

Configure Smart Alerts for different event combinations

User-programmable IP camera snapshots

Linux inside

Optional 48V DC-DC power converter built inside the unit.

Cascade up to 5 units via Ethernet connection (1 master, 4 slaves)

Triggered Events can send SSH commands to soft shutdown or reboot machines

GENERAL DATA

 

RJ45 Sensor Ports

Five RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.

Two levels of user-defined alerts – non-critical and critical.

Provides +12 VDC, 100 mA for each port

Digital Inputs

Five screw terminal pairs for connecting dry contact devices.

Potential-free

Input voltage: 0VDC to +25VDC

Over-voltage surge protection

Maximum resistance to close contact: 300K Ohm

Output Relays

Two screw terminals pairs.

Potential-free relay switch contacts.

Normally open / normally closed connection points.

Maximum switching load: 0.5A at 125VAC, 1A at 30VDC, 0.5A at 48VDC.

Alarm Port

One screw terminal pair.

  Provides +12VDC, 180 mA to supply an alarm

beacon or siren.

  Fuse protection

AUX Power

One screw terminal pair.

  Provides +12 VDC, 500 mA

RS232 AUX Port

One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device

USB Device Ports

Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive

USB Console Port

One female USB Type B connector for connecting a PC for serial terminal access

Ethernet Port

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.

Supports full- and half-duplex

Power

Dual DC power.

If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the optionalbattery backup.

100 to 240 VAC at 50 or 60 Hz via AC adapter.

Includes one country-specific AC adapter. The

second AC adapter is sold separately.

Power Consumption: 15W

  Optional 48VDC power.

Accepts 18~72VDC (48VDC nominal).

For installation in a 48V or 24V Telecom environment.

Use the PWR-48V-12V1-6A DC-DC power converter to install all other ENVIROMUX-5D units in a 48V or 24V Telecom environment

MTBF

ENVIROMUX-5D: 57,846 hours.

  ENVIROMUX-5DB: 57,723 hours.

  ENVIROMUX-5D-48V: 55,562 hours.

Protocols

HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0

Compatible with any SNMP management software.

The unit can be polled via SNMP.

Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.

An IP address can be assigned to the ENVIROMUX-5D automatically by a DHCP server.

Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).

Alerts are posted in event log, which is accessible through Web user interface.

Email alerts can be sent to 17 addresses.

Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert.

SNMP traps have unique OID's (Object Identifiers) for each sensor.

Internal Temperature Sensor

Applications from:

ENVIROMUX-5D: 32 to 140°F (0 to 60°C)

ENVIROMUX-5DB: 32 to 104°F (0 to 40°C)

ENVIROMUX-5D-IND: 32 to 176°F (0 to 80°C)

ENVIROMUX-5DB-IND: 32 to 140°F (0 to 60°C)

Accurate to within ±1.35°F (±0.75°C).

Internal Humidity Sensor

Applications from 20% to 80% relative humidity at:

ENVIROMUX-5D: 32 to 140°F (0 to 60°C)

ENVIROMUX-5DB: 32 to 104°F (0 to 40°C)

ENVIROMUX-5D-IND: 32 to 176°F (0 to 80°C)

ENVIROMUX-5DB-IND: 32 to 140°F (0 to 60°C)

Accurate to within ±5% relative humidity

Optional Back-up Battery

Rechargeable sealed lithium battery.

Provides back-up for two hours.

Dimensions

WxDxH:

ENVIROMUX-5D(-D): 7.88x3x1.75 in (200x76x44 mm)

ENVIROMUX-5DB(-D): 7.88x3x1.75 in (200x76x44 mm)

ENVIROMUX-5D-IND: 7.88x3x1.75 in (200x76x44 mm)

ENVIROMUX-5D-48V: 10.25x3.1x1.75 in (260x79x44 mm)

ENVIROMUX-5DB-IND: 10.6x3.1x1.75 in (269x79x44 mm)

Optional 1RU rackmount kit available
(ENVIROMUX-RK1-5D(48V).

The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack

Weight

ENVIROMUX-5D: 1.0 lb (0.45 kg)

Environmental

Operating temperature:

ENVIROMUX-5D: 32 to 140°F (0 to 60°C)

ENVIROMUX-5DB: 32 to 104°F (0 to 40°C)

ENVIROMUX-5D-IND: 32 to 176°F (0 to 80°C)

ENVIROMUX-5DB-IND: 32 to 140°F (0 to 60°C)

Storage temperature:

ENVIROMUX-5D: -22 to 140°F (-30 to 60°C)

ENVIROMUX-5D-IND: -4 to 176°F (-20 to 80°C)

Operating /Storage Relative Humidity: 17 to 90% non-condensing RH

Regulatory Approvals

CE, RoHS